Wedge Diverter#
The Wedge Diverter consists of a bump positioned upstream of the flip area, under the surface, to create a rise that brings the components back into a zone where the flip can be more effective.
Recommended applications#
Solution to adopt for handling delicate components that may break or deform under the action of the flip. It is particularly suitable for parts that roll or slide easily.
Mounting procedure#
Warning
Warning Make sure the FlexiBowl® is switched off and stationary before proceeding with the mounting.
FB500:#
Step |
Operation |
|---|---|
1 |
Remove the fixing screws of both diverters |
2 |
Unscrew the adjustment screws to remove both diverters |
3 |
Fit the plug cartridge in place of the post-flip diverter |
4 |
Fit the wedge diverter assembly in place of the pre-flip diverter |
FB650-800:#
Step |
Operation |
|---|---|
1 |
Remove the fixing screws of both diverters |
2 |
Unscrew the adjustment screws to remove both diverters |
3 |
Making sure the square nuts are present, fit the wedge diverter cartridge in place of the pre-flip diverter |
4 |
Replace the ring sector upstream of the pre-flip diverter with the one supplied in the kit |
5 |
Fix the wall with the supplied screws |
FB1200:#
Step |
Operation |
|---|---|
1 |
Remove the fixing screws of both diverters |
2 |
Unscrew the adjustment screws to remove both diverters |
3 |
Remove the ring sector on which the pre-flip diverter was mounted and replace it with the ring sector included in the kit |
4 |
Fit the plug cartridge in place of the post-flip diverter |
5 |
Making sure the square nuts are present, fit the wedge diverter cartridge in place of the pre-flip diverter |
6 |
Fix the wall with the supplied screws |
Adjustment procedure#
The wedge diverter does not require adjustment
Checking correct operation#
Before starting regular use of the accessory, check that the disc slides correctly over the wedge diverter.