Application Technical Data#

Characteristics of the components permitted on the FlexiBowl®#

Component specifications

FlexiBowl® 200

FlexiBowl® 350

FlexiBowl® 500

FlexiBowl® 650

FlexiBowl® 800

FlexiBowl® 1200

Maximum size of the single component

20 mm

50 mm

100 mm

150 mm

250 mm

400 mm

Maximum height of the single component¹

10 mm

20 mm

40 mm

45 mm

60 mm

70 mm

Maximum weight of the single component

20 g

40 g

100 g

170 g

250 g

300 g

Maximum load capacity on surface

N.A.

N.A.

7 kg

7 kg

7 kg

7 kg

Maximum load capacity on rigid disc

1 kg

3 kg

7 kg

N.A.

N.A.

N.A.

  1. The maximum component height is the one that leaves the necessary space between the component and the upper surface of the flip screen to allow it to be flipped

Note

The maximum component size value is derived from tests carried out internally and is to be considered purely indicative, as other factors may influence it (dimensions of the Bulk Feeder, robot tool used for picking, etc.); for more precise indications, do not hesitate to contact our team or request a free test.

Note

The maximum component height is calculated taking into account the space needed to flip it using the flip, and is to be considered purely indicative, as the possibility of flipping also depends on the ratio between its dimensions. For a more precise assessment of the FlexiBowl® size best suited to the part to be handled, or of the component’s compatibility with the desired FlexiBowl®, it is possible to contact our team or request a free test.

How to assess the component’s flippability#

Enter the component data in the calculator: the system automatically checks compatibility with the selected FlexiBowl® size and returns the recommended flip pressure.

Tip

Measure the part resting in its most stable position: the height is the distance from the support surface to the highest point, the minimum width is the narrowest side of the bounding rectangle of the support base.

Flip pressure calculatorIndicative result to be validated
1FlexiBowl® size
2Component dimensions and weight
mm
mm
g
3Material
4Work surface

Attention

The calculated value is a starting point to be refined on the machine. For a more precise and detailed evaluation of the flip parameters, do not hesitate to contact our team or request a free test.