Visual Inspection of the Flip#
Warning
Disconnect the electrical and pneumatic power supply before proceeding with the inspection.
Warning
Some parts involved in the maintenance process described here may have reached high temperatures during operation; make sure to leave the FlexiBowl® switched off long enough for all its parts to be handled safely.
FlexiBowl® 200#
What is needed?#
Item/equipment |
Quantity |
|---|---|
H2.5 hex key |
1 |
H3 hex key |
1 |
H4 hex key |
1 |
Replacement flip unit |
1 |
Procedure#
Step |
Operation |
|---|---|
1 |
Remove the flip screen |
2 |
|
3 |
Remove the front guard |
4 |
For a better view, also remove the rear guard; release the shield support to make the work easier. |
5 |
Visually check the wear condition of the striker elements |
6 |
When the inspection is finished, refit all the components |
FlexiBowl® 350-500-650-800-1200#
What is needed?#
Item/equipment |
Quantity |
|---|---|
H5 hex key |
1 |
H4 hex key |
1 |
Replacement flip unit |
1 |
Procedure#
To inspect the flip, proceed as follows:
Step |
Operation |
|---|---|
1 |
Remove the flip barrier assembly |
2 |
|
3 |
Remove the flip cover plate |
4 |
Visually check the wear condition of the striker elements |
5 |
When the inspection is finished, refit the flip cover plate, the surface or rigid disc and the flip barrier assembly |
Tip
On the FlexiBowl® 350 it may be more convenient to remove the guard.