Accessories and Options#

This page collects the variants, accessories and options available in the price list for the vibrating Bulk Feeders, grouped by function. The Bulk Feeders are available in six base models (1.5 l, 3 l, 5 l, 10 l, 20 l and 40 l); the 1.5 l bowl is made of plastic, the others are in INOX stainless steel.

Attention

Unless otherwise indicated, accessories and options are not available for the 1.5 l Bulk Feeder. For custom models, refer to the project technical file.

Summary#

Option

Function

Sizes

Version 110 V

Low-voltage power supply (115 Vac)

3 l · 5 l · 10 l · 20 l · 40 l

PU coating

Polyurethane coating of the bowl

3 l · 5 l · 10 l · 20 l · 40 l

Dosing barrier

Adjustment of the flow of components at the outlet

3 l · 5 l · 10 l · 20 l · 40 l

Hand guard

Safety guard for the hands

3 l · 5 l · 10 l · 20 l · 40 l

Front photocell

Presence of components in the front area of the bowl

3 l · 5 l · 10 l · 20 l · 40 l

Rear photocell

Level control of the parts in the bowl

3 l · 5 l · 10 l · 20 l · 40 l

Anti-vibration

Isolation of vibrations towards the FlexiBowl®

3 l · 5 l · 10 l · 20 l · 40 l

Controller cables

Modbus RTU communication and external command

All (controller)

Lowered Bulk Feeder Wide

Vibrating linear hopper with reduced profile, for accumulating feeding systems

FlexiBowl® 650 · 800 · 1200

110 V option – Lowered Wide

Low-voltage power supply

FlexiBowl® 650 · 800 · 1200

PU coating – Lowered Wide

Polyurethane coating of the bowl

FlexiBowl® 650 · 800 · 1200

Anti-vibration kit – Lowered Wide

Isolation of vibrations towards the FlexiBowl®

FlexiBowl® 650 · 800 · 1200


Bulk Feeder variants#

Version 110 V#

The standard power supply of the Bulk Feeder is 230 Vac ±5%. A variant for low-voltage power networks is available, supplied only on explicit request. To check the current draw of each size, refer to the technical data.

Power supply

115 Vac ±5%

Frequency / Phase

50-60 Hz / single-phase

Sizes

INOX 3 l · 5 l · 10 l · 20 l · 40 l

References

Technical data · Electrical connection

Version with polyurethane (PU) coating#

This version provides a polyurethane coating of the INOX stainless steel bowl, available on request for all sizes except the 1.5 l Bulk Feeder. The coating is a wear item: its condition must be checked every month, as indicated in the maintenance plan.

Polyurethane coating

Sizes

INOX 3 l · 5 l · 10 l · 20 l · 40 l

Maintenance

Monthly wear check: see Maintenance and Troubleshooting

Lowered Bulk Feeder Wide Version#

Vibrating linear hopper with reduced vertical profile, designed to be integrated with accumulating feeding systems, to ensure a controlled dosing of components on FlexiBowl® 650/800/1200.

Note

The content of this section will be available soon.

110 V Electric Power Option – Lowered Wide#

The content of this section will be available soon.

Polyurethane Coating – Lowered Wide#

The content of this section will be available soon.

Anti-Vibration Kit – Lowered Wide#

The content of this section will be available soon.


Dosing and protection#

Dosing barrier#

The dosing barrier is an adjustable doser fitted at the bowl outlet: by adjusting its position, the flow of components leaving the Bulk Feeder is controlled.

Dosing barrier

Function

Adjustment of the flow of components at the outlet

Adjustment

Adjustable

Sizes

3 l · 5 l · 10 l · 20 l · 40 l

Hand guard (Hand Guard)#

Safety guard for the hands, available as an optional accessory. Being a safety device, it must not be removed or bypassed.

Hand safety guard

Function

Safety guard for the hands

Sizes

3 l · 5 l · 10 l · 20 l · 40 l


Photocells#

The photocells make it possible to monitor the state of the bowl during the feeding process. They are available in two kits, both for all sizes except the 1.5 l Bulk Feeder.

Front photocell kit#

Checks the presence of components in the front area of the vibrating bowl during the feeding process.

Front photocell

Rear photocell kit#

Monitors the level of the parts inside the bowl.

Rear photocell

Anti-vibration#

The Bulk Feeder generates vibrations to move the parts along the bowl. If it is installed on the surface of a machine sensitive to vibrations, insulating and anti-vibration material must be placed between the two surfaces, to prevent the vibrations from being transmitted to the FlexiBowl®. Anti-vibration elements and an anti-vibration kit are available, for sizes from 3 l to 40 l.

Function

Isolation of the vibrations of the Bulk Feeder

Sizes

3 l · 5 l · 10 l · 20 l · 40 l

References

Installation: Transport and Installation


Controller cables#

Note

The FlexiBowl® connection cables (power, Ethernet, I/O, rack) are described on the Connection cables page.

The Bulk Feeder controller uses two cables, both available in lengths of 3 m, 5 m and 10 m.

Modbus RTU cable#

RS485 (Modbus RTU) communication cable between the Bulk Feeder controller and the FlexiBowl®. It connects to the HOPPER connector of the FlexiBowl® (standard panel for sizes 500 – 1200, rack for sizes 200 / 350) and to one of the two RS485 ports of the controller; the other RS485 port allows daisy-chain connection between several Bulk Feeders.

Controller pins (RS485)

Description

1

A+

2

NC

3

B-

4

GND

5

NC

FlexiBowl® side connector: M12, A-code. Pinout and connection sequence: Controller and Wiring.

Important

In a single Bulk Feeder configuration, the unused RS485 connector must be closed with the dedicated termination plug, fitted with a 120 Ω resistor between A+ and B-.

Input cable#

Cable for connecting the Enable Output Port (4-pin) of the controller, used for commanding the Bulk Feeder from an external device when it is purchased separately. To enable the controller output, a PNP signal must be applied to this port. Pinout and connection sequence: Controller and Wiring.

Controller pin

Description

1

+24V

2

NC

3

GND

4

Input

Available lengths#

Cable

3 m

5 m

10 m

Modbus RTU

✓

✓

✓

Input

✓

✓

✓