Overview and Unboxing#

Main components of the FlexiBowl®#

The FlexiBowl® consists of the following main parts:

FlexiBowl® 650 view
Select a component from the list
No.ComponentDescription
FlexiBowl® 350 view
Select a component from the list
No.ComponentDescription
FlexiBowl® 200 view
Select a component from the list
No.ComponentDescription

What is in the box?#

This section describes the contents of the FlexiBowl® 3.0 package and the standard components supplied with the unit.

Important

Before proceeding with the installation, verify that all components listed in this section are present in the package. In case of missing or damaged components, contact Technical Support before putting the device into operation.


1. Package contents#

Inside the package are the FlexiBowl® and all standard connection adapters:

Component

Description

Image

Power connector

Equipped with a locking clip that prevents accidental disconnection

../../_images/connettore_power.png

10-pin connector cable

Carries the 24 Vdc power supply and the two Safe Torque Off (STO) channels

../../_images/connettore_STO.png

M12 D-code connector

Used for Ethernet communication between the FlexiBowl® and the system

../../_images/connettore_ethernet.png

M12 A-code connector

Used for Modbus RTU communication with the Bulk Feeder controller

../../_images/connettore_hopper.png

USB flash drive

Contains the unit manuals and its individual test report

—

Note

Connection cables can be purchased separately as an option in 3, 5 or 10 meters: see Connection cables.


2. Additional components by size#

Model

Image

Additional equipment

FlexiBowl® 200 / 350

../../_images/FB350.png

Also includes the rack and the related connection cables, required for the external electronics. The included cables, 3 m long, allow all connections between rack and FlexiBowl® to be made. 5/10 meter versions are available as an option (see rack cables).

../../_images/rack.png

FlexiBowl® 500 and above

../../_images/FB650.png

Do not require the external connection rack: the electronics are integrated directly into the unit

Rack connection panel (FlexiBowl® 200 / 350)#

Rack connection panel

The rear panel of the rack groups all the connection points described in the previous paragraph: power supply (POWER SUPPLY), Safe Torque Off (STO), motor (MOTOR), Ethernet to the system (C-ETH IN) and to the FlexiBowl® (C-ETH FB), Bulk Feeder (HOPPER) and encoder signals (C-A SIGNAL, C-B SIGNAL).

Note

For details on the positioning and connection of the rack, refer to the Mechanical Installation section.


3. Accompanying documentation#

The USB flash drive supplied contains:

  • The unit manuals (offline version of the documentation)

  • The individual test report of the purchased FlexiBowl®