Conditions of use and environment#

Intended (correct) use#

The FlexiBowl® is available in six models: 200, 350, 500, 650, 800 and 1200. The machine in question is intended for industrial use for:

Operation

Permitted

Not permitted

Working environment

Handling for picking of:

Components whose maximum weight and dimensions vary according to the machine model.

Any other component not within the permitted maximum weight and dimension range.

Industrial.

Note

For more information on the type of components permitted, see the “Technical data” paragraph of this manual.

The FlexiBowl® has been created to:

  • meet the specific requirements mentioned in the sales contract;

  • be used in accordance with the instructions and limits of use given in this manual.

The machine is designed and built to work safely if:

  • it is used within the limits declared in the contract and in this manual;

  • the procedures in the user manual are followed;

  • routine maintenance is carried out at the times and in the ways indicated;

  • extraordinary maintenance is carried out promptly when necessary;

  • the safety devices are not removed and/or bypassed.

Reasonably foreseeable misuse#

The reasonably foreseeable misuse is listed below:

  • processing liquid components and fine grit;

  • changing working parameters in ways that compromise safety;

  • transporting people;

  • using the machine as a support point;

  • using the machine so as to obtain production values above the prescribed limits;

  • modifying / tampering with the electrical and pneumatic connections of the machine or any other of its components;

  • using the machine with a product other than that listed in the “Intended (correct) use”;

  • using the machine in a way other than that provided for in the paragraph “Intended (correct) use”.

Any use of the machine other than that intended must be authorized in advance in writing by the Manufacturer. In the absence of such written authorization, the use is to be considered “improper use”; the Manufacturer therefore declines all liability for any damage caused to property or persons and considers any type of warranty on the machine void.

Important

Improper use of the FlexiBowl® excludes any liability of the Manufacturer.

Provisions to be made by the customer#

Without prejudice to any different contractual agreements, the Customer is normally responsible for providing:

  • premises (including building works, such as any required foundations or ducts, and lighting);

  • electrical systems up to the machine’s power supply points, in accordance with the regulations in force in the country of installation and/or required by the machine Manufacturer. All the technical specifications required by the Manufacturer are contained in the sales contract. The Manufacturer declines all liability if the customer fails to guarantee the technical characteristics of the electrical system required in the sales contract.

  • the electrical power supply for the machine, including the earth conductor, according to the characteristics and tolerances required and specified in this manual.

  • auxiliary services suited to the needs of the machine;

  • tools and consumables required for assembly and installation;

  • lubricants needed to start up the machine;

  • the pneumatic supply for the machine, suitable as per the specification given in the paragraph “Technical data”;

  • suitable lifting and handling equipment.

Permitted environmental conditions#

The environment in which the FlexiBowl® is installed and used is indoors, protected from atmospheric agents such as rain, hail, snow, fog, airborne dust, combustible dust, protected from aggressive agents such as corrosive vapors or sources of excessive heat, and must not be classified ATEX. Use of the FlexiBowl®, of the associated control systems and of the drive equipment in conditions other than those listed is not permitted. In particular, the installation and operating environment must not present:

  • Exposure to corrosive fumes;

  • Exposure to excessive humidity (above 85 %) and rapid changes in relative humidity (above 0.005 p.u./h);

  • Exposure to excessive dust;

  • Exposure to abrasive dust;

  • Exposure to oily vapors;

  • Exposure to explosive mixtures of dust or gas;

  • Exposure to salt-laden air;

  • Exposure to abnormal vibrations, impacts or shocks;

  • Exposure to weather outside the permitted limits or to dripping water;

  • Exposure to unusual transport or storage conditions;

  • Exposure to high or rapid temperature changes (above 5K/h);

  • Presence of nuclear radiation.

The FlexiBowl® is designed and built to operate safely in the following environmental conditions:

Degree of protection of the FlexiBowl®

Ambient temperature during operation

Ambient temperature during storage

Maximum relative humidity

IP40

+5 ÷ +40 °C

-10 ÷ 65 °C

85%

Warning

Environmental conditions other than those specified may cause serious damage to the machine. Placing the machine in environments that do not correspond to those indicated voids the warranty for the parts to be replaced.

Important

The work surface must be sufficiently lit. If shadow areas or differences in level are found at the workplace, it is the user’s responsibility to provide suitable lighting devices.

If these requirements are not complied with, the Manufacturer declines all liability.

Solutions for critical environments#

Note

If the system must operate in environments where liquids are present, provide adequate protection (IP65 or higher enclosures) and consult the ARS technical service for customized solutions.

Customer responsibility#

Warning

It is the customer’s responsibility to:

  • Document the thermal risks in its own risk assessment

  • Train the personnel on the procedures to avoid accidental contact

  • Provide warning signs where necessary

  • Ensure adequate ventilation of the components

Additional environmental precautions#

Note

To preserve the integrity of the components:

  • Avoid direct exposure to sunlight

  • Protect from excessive vibrations during storage

  • Keep in a dry environment free of aggressive dust

  • The camera is sensitive to mechanical shocks: handle with care

Obligations and prohibitions#

Obligations of the users#

The user (entrepreneur or employer) must:

  • take into account the capabilities and conditions of the operators in relation to their health and safety;

  • provide personal protective equipment suited to the individual procedures;

  • provide compliant lifting equipment and procedures;

  • require each worker to comply with the company’s safety rules and provisions and with the use of the collective and personal protective equipment made available to them;

  • train the personnel on the procedures to follow in the event of an accident;

  • train the personnel on the residual risks present;

  • train the personnel on the devices provided for operator safety;

  • train the personnel on the risks of noise emission in the work environment;

  • train the personnel on the general accident-prevention rules laid down by European directives and by the legislation of the country of destination of the machine.

Important

Allow only personnel who have read this manual and been suitably trained to work on the machine.

Obligations of the assigned personnel (operators/maintenance staff/technicians)#

The personnel must:

  • Always carry out maintenance work with the machines switched off. Do not lubricate moving parts.

  • When the machine is running, do not work near it wearing chains, bracelets, ties or other clothing that could get caught in the mechanisms.

  • Operators with long hair are required to tie it back so that it cannot get caught.

  • Always carry out work on the electrical panel, junction boxes, cables and all components of the electrical system with the main switch off.

  • When starting the machine, make sure that nobody is inside the hazardous zones.

  • During operation, pay the utmost attention that nobody can directly access the moving parts.

  • Use the protective devices provided by the employer appropriately.

  • Immediately report any deficiencies of the safety devices to the employer, the manager or the supervisor.

Prohibitions for the assigned personnel (operators/maintenance staff/technicians)#

In particular, the personnel must not:

  • use the machine improperly, i.e. for purposes other than those indicated in the “Intended use” paragraph;

  • remove or modify the safety or signaling devices without authorization;

  • carry out on their own initiative operations or maneuvers that are not within their competence or that may compromise their own safety or that of other workers;

  • wear bracelets, rings or necklaces that may dangle and be dragged by moving parts, creating a hazard for the operator;

  • replace or change the speeds of the machine components without being permitted to do so by a supervisor;

  • modify the machine cycle;

  • modify the electrical connections to bypass the internal safety functions;

  • use the machine if it has not been installed in accordance with the regulations in force;

  • use the machine as a support point even when it is not operating (at the risk of falling and/or damaging the machines themselves);

  • use the machine outside the permitted environmental conditions (see paragraph “Transport and handling”).

Warning

ARS S.r.l. is not liable for damage caused to property or persons if:

  • it is established that the machine has been used in one of the non-permitted environments;

  • the obligations and prohibitions described here have not been complied with.